JTS #25 - Squier Sonic Strat Conversion
What started as an impulse purchase at Guitar Center turned into one of the most fun projects I’ve done in a little while - introducing the first “entry-level” conversion - the same high-quality electronic components I use in my nicest customer conversions have been used to mod this Squier Sonic Stratocaster guitar into a Tiger-like instrument. It sounds stunning and is a worthwhile Jerry setup for any player looking for a fun guitar that they aren’t afraid to take out to a dirty bar, or something they’re looking to not worry about scratching, dinging, etc. I think this guitar will look even better when it gets its first scratch!
Electronics/Mods:
2x Dimarzio Super 2s
1x Dimarzio SDS-1
Waldotronics Spud G-1 Buffer
onboard effects loop with bypass switch
10kA volume, 500kA middle tone, 500ka/500ka bridge/neck tone
5-way blade switch
pickup splits for both humbuckers
9v battery, located in trem cavity
upgraded tuners
glass/sterling silver “glass cabochon” artwork below bridge
brass output plate
brass knobs
brass pickguard screws
Body:
Number of Strings: 6
Left-/Right-handed Right-handed
Body Type: Solidbody
Body Shape: Stratocaster
Body Material: Poplar
Body Finish: Gloss Polyurethane
Color: California Blue
Neck:
Neck Material: Maple
Neck Shape: C
Neck Joint: Bolt-on
Radius: 9.5"
Fingerboard Material: Laurel
Fingerboard Inlay: Dots
Number of Frets: 21, Narrow Tall, Nickel
Scale Length: 25.5"
Nut Width: 1.650"
Nut Material: Synthetic Bone
Hardware:
Bridge/Tailpiece: 6-Saddle Vintage-Style Synchronized (blocked off with wood block)
Tuners: upgraded from stock to Fender branded tuners
Includes non-fender hardshell case (used).
Free shipping to continental U.S.
What started as an impulse purchase at Guitar Center turned into one of the most fun projects I’ve done in a little while - introducing the first “entry-level” conversion - the same high-quality electronic components I use in my nicest customer conversions have been used to mod this Squier Sonic Stratocaster guitar into a Tiger-like instrument. It sounds stunning and is a worthwhile Jerry setup for any player looking for a fun guitar that they aren’t afraid to take out to a dirty bar, or something they’re looking to not worry about scratching, dinging, etc. I think this guitar will look even better when it gets its first scratch!
Electronics/Mods:
2x Dimarzio Super 2s
1x Dimarzio SDS-1
Waldotronics Spud G-1 Buffer
onboard effects loop with bypass switch
10kA volume, 500kA middle tone, 500ka/500ka bridge/neck tone
5-way blade switch
pickup splits for both humbuckers
9v battery, located in trem cavity
upgraded tuners
glass/sterling silver “glass cabochon” artwork below bridge
brass output plate
brass knobs
brass pickguard screws
Body:
Number of Strings: 6
Left-/Right-handed Right-handed
Body Type: Solidbody
Body Shape: Stratocaster
Body Material: Poplar
Body Finish: Gloss Polyurethane
Color: California Blue
Neck:
Neck Material: Maple
Neck Shape: C
Neck Joint: Bolt-on
Radius: 9.5"
Fingerboard Material: Laurel
Fingerboard Inlay: Dots
Number of Frets: 21, Narrow Tall, Nickel
Scale Length: 25.5"
Nut Width: 1.650"
Nut Material: Synthetic Bone
Hardware:
Bridge/Tailpiece: 6-Saddle Vintage-Style Synchronized (blocked off with wood block)
Tuners: upgraded from stock to Fender branded tuners
Includes non-fender hardshell case (used).
Free shipping to continental U.S.
What started as an impulse purchase at Guitar Center turned into one of the most fun projects I’ve done in a little while - introducing the first “entry-level” conversion - the same high-quality electronic components I use in my nicest customer conversions have been used to mod this Squier Sonic Stratocaster guitar into a Tiger-like instrument. It sounds stunning and is a worthwhile Jerry setup for any player looking for a fun guitar that they aren’t afraid to take out to a dirty bar, or something they’re looking to not worry about scratching, dinging, etc. I think this guitar will look even better when it gets its first scratch!
Electronics/Mods:
2x Dimarzio Super 2s
1x Dimarzio SDS-1
Waldotronics Spud G-1 Buffer
onboard effects loop with bypass switch
10kA volume, 500kA middle tone, 500ka/500ka bridge/neck tone
5-way blade switch
pickup splits for both humbuckers
9v battery, located in trem cavity
upgraded tuners
glass/sterling silver “glass cabochon” artwork below bridge
brass output plate
brass knobs
brass pickguard screws
Body:
Number of Strings: 6
Left-/Right-handed Right-handed
Body Type: Solidbody
Body Shape: Stratocaster
Body Material: Poplar
Body Finish: Gloss Polyurethane
Color: California Blue
Neck:
Neck Material: Maple
Neck Shape: C
Neck Joint: Bolt-on
Radius: 9.5"
Fingerboard Material: Laurel
Fingerboard Inlay: Dots
Number of Frets: 21, Narrow Tall, Nickel
Scale Length: 25.5"
Nut Width: 1.650"
Nut Material: Synthetic Bone
Hardware:
Bridge/Tailpiece: 6-Saddle Vintage-Style Synchronized (blocked off with wood block)
Tuners: upgraded from stock to Fender branded tuners
Includes non-fender hardshell case (used).
Free shipping to continental U.S.
Here’s a snippet of some sloppy playing through the full rig!