WAITLIST - Loaded Strat Guard - Tiger Wiring

$0.00

This is the waitlist for loaded pickguards. Each guard is open to customization, but the overall build follows Jerry’s Tiger wiring. If you require a simpler build, please use the waitlist that fits your schematic style the best. You are responsible for ensuring there is room for a battery, buffer, and pickups, and pickguard fit in your particular strat setup. Each pickguard is shipped with a video of the pickguard being tested and functioning prior to shipping, and you are responsible for the rest. For this reason, loaded pickguards are sold as-is and cannot be returned. I test all guards on a standard stratocaster body for fit and function. The guard is pre-wired, but soldering the OBEL jack plate, buffer, and 9V harness, at a minimum, will be required for successful installation on your instrument. I will provide clear instructions on where to connect wires that will need to be connected.

I use:

  • Mil-spec pots

  • Orange drop capacitors

  • Waldotronics buffers

  • Pre-Wired OBEL plate for easy installation

  • Alligator-style split pickguard (upon request) for easy electronics access

You choose:

  • Pickguard color

  • Pickguard layout

  • Coil split layout

  • Pickup configuration 

  • Pickup type (Super 2s, Super Distortions, and/or SDS-1s)

Standard Configuration:

  • .022 capacitors on each pickup

  • Middle Tone knob

  • Bridge/Neck Tone Knob

  • 10k Volume knob (25k available upon request)

  • OBEL (w/ bypass switch)

  • 2-3 humbucker coil split switches

  • 5 way switch

Invoiced after consultation. Please allow up to 2 month build times after consultation for each pickguard. If you already have components you would like me to use, I will use them if you send them to me.

Total cost is between $750 and $850.

$800 - pickguard, basic knobs, no OBEL or OBEL jack plate

$850 - pickguard, basic knobs, OBEL & jack plate

$900 - pickguard, Lafayette radio style Wolf knobs, Rosebud (3x humbuckers), OBEL & jack plate

Please be prepared to be invoiced for up to these amounts if signing up for the waitlist.

Quantity:
Add To Cart

This is the waitlist for loaded pickguards. Each guard is open to customization, but the overall build follows Jerry’s Tiger wiring. If you require a simpler build, please use the waitlist that fits your schematic style the best. You are responsible for ensuring there is room for a battery, buffer, and pickups, and pickguard fit in your particular strat setup. Each pickguard is shipped with a video of the pickguard being tested and functioning prior to shipping, and you are responsible for the rest. For this reason, loaded pickguards are sold as-is and cannot be returned. I test all guards on a standard stratocaster body for fit and function. The guard is pre-wired, but soldering the OBEL jack plate, buffer, and 9V harness, at a minimum, will be required for successful installation on your instrument. I will provide clear instructions on where to connect wires that will need to be connected.

I use:

  • Mil-spec pots

  • Orange drop capacitors

  • Waldotronics buffers

  • Pre-Wired OBEL plate for easy installation

  • Alligator-style split pickguard (upon request) for easy electronics access

You choose:

  • Pickguard color

  • Pickguard layout

  • Coil split layout

  • Pickup configuration 

  • Pickup type (Super 2s, Super Distortions, and/or SDS-1s)

Standard Configuration:

  • .022 capacitors on each pickup

  • Middle Tone knob

  • Bridge/Neck Tone Knob

  • 10k Volume knob (25k available upon request)

  • OBEL (w/ bypass switch)

  • 2-3 humbucker coil split switches

  • 5 way switch

Invoiced after consultation. Please allow up to 2 month build times after consultation for each pickguard. If you already have components you would like me to use, I will use them if you send them to me.

Total cost is between $750 and $850.

$800 - pickguard, basic knobs, no OBEL or OBEL jack plate

$850 - pickguard, basic knobs, OBEL & jack plate

$900 - pickguard, Lafayette radio style Wolf knobs, Rosebud (3x humbuckers), OBEL & jack plate

Please be prepared to be invoiced for up to these amounts if signing up for the waitlist.

This is the waitlist for loaded pickguards. Each guard is open to customization, but the overall build follows Jerry’s Tiger wiring. If you require a simpler build, please use the waitlist that fits your schematic style the best. You are responsible for ensuring there is room for a battery, buffer, and pickups, and pickguard fit in your particular strat setup. Each pickguard is shipped with a video of the pickguard being tested and functioning prior to shipping, and you are responsible for the rest. For this reason, loaded pickguards are sold as-is and cannot be returned. I test all guards on a standard stratocaster body for fit and function. The guard is pre-wired, but soldering the OBEL jack plate, buffer, and 9V harness, at a minimum, will be required for successful installation on your instrument. I will provide clear instructions on where to connect wires that will need to be connected.

I use:

  • Mil-spec pots

  • Orange drop capacitors

  • Waldotronics buffers

  • Pre-Wired OBEL plate for easy installation

  • Alligator-style split pickguard (upon request) for easy electronics access

You choose:

  • Pickguard color

  • Pickguard layout

  • Coil split layout

  • Pickup configuration 

  • Pickup type (Super 2s, Super Distortions, and/or SDS-1s)

Standard Configuration:

  • .022 capacitors on each pickup

  • Middle Tone knob

  • Bridge/Neck Tone Knob

  • 10k Volume knob (25k available upon request)

  • OBEL (w/ bypass switch)

  • 2-3 humbucker coil split switches

  • 5 way switch

Invoiced after consultation. Please allow up to 2 month build times after consultation for each pickguard. If you already have components you would like me to use, I will use them if you send them to me.

Total cost is between $750 and $850.

$800 - pickguard, basic knobs, no OBEL or OBEL jack plate

$850 - pickguard, basic knobs, OBEL & jack plate

$900 - pickguard, Lafayette radio style Wolf knobs, Rosebud (3x humbuckers), OBEL & jack plate

Please be prepared to be invoiced for up to these amounts if signing up for the waitlist.

Tiger Pickguard (Unloaded)
$60.00
sold out
Rosebud Pickguard (Unloaded)
$60.00
SpudPlate™ Rosebud Pickguard (Unloaded)
$80.00
sold out
SpudPlate™ Tiger Pickguard (Unloaded)
$80.00